Engineering Connections

2 Strand Court, Watt Close, East Portway, Andover, Hampshire. SP10 3TG. UK
Phone +44 ( 0 ) 1264 350778 Fax +44 (0 ) 1264 334215

Technical Information on Single Pole Connectors

Heavy Duty Range

Starter Range

Plug & Socket Material

Brass

Brass

Finish

Silver Plated

Silver Plated

Insulation Material

DAP

DAP

Contact Sealing

IP67

IP67

Continuous Rating

300A

120A

Short Circuit current 1s

12kA

4.8kA

Short Circuit current 3s

7kA

2.8kA

Surge Current

30kA

12kA

Min operating Temperature

-40°C

 -40°C

Connectors are available in both high and low temperature ranges.

The high temperature range is designed specifically for high ambient temperature environments, such as those found in vehicle engine compartments. This range can operate up to 200°C and is signified by a blue heat resistant insulator.

The low temperature is signified by a black insulator and can operate in environments up to a maximum of 100°C.

Engineering Connections recommend keeping the brass components in a sealed container ( ie plastic bag )  in a clean, dry environment, when stored for long periods before use. See Storing of Connectors in PDF format

Engineering Connections are continually improving these products, based on customer feedback. We therefore reserve the right to implement improvements to achieve customer satisfaction whilst keeping all assemblies interchangeable.